Electrical Thermal Imaging:


Thermographic or thermal image inspections find hot spots caused by defects in connections and components. Infrared thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards, productivity loss or possibly even electrical fires.

An increase in heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration of your electrical installation. This is why your insurance company may have asked for an electrical thermographic inspection, to find and prevent problems before they cause damage to your personnel, equipment and facility.

Using the latest in Thermal Imaging cameras and software from FLIR camera systems Volt Pro will remove electrical switchboard covers, distribution board covers and machinery plates to expose the wiring systems and components required to carry out testing.

Using our fault finding techniques, we can analyse for electrical faults and hotspots and will produce a fully detailed report specifying irregularities found, including the images as recorded by our equipment. Volt Pro will then use the report and advise the customer of any required repairs and preventative maintenance.

Our experienced and highly trained team can carry out any repairs that are required quickly and with minimum interruption to the electrical supply and at a time that minimised impact to your business.

Request Your Free Consultation Now


Electrical Thermal Imaging:



Thermographic or thermal image inspections find hot spots caused by defects in connections and components. Infrared thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards, productivity loss or possibly even electrical fires.

An increase in heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration of your electrical installation. This is why your insurance company may have asked for an electrical thermographic inspection, to find and prevent problems before they cause damage to your personnel, equipment and facility.

Using the latest in Thermal Imaging cameras and software from FLIR camera systems Volt Pro will remove electrical switchboard covers, distribution board covers and machinery plates to expose the wiring systems and components required to carry out testing.

Request Your Free Consultation Now

Warning! Electrical faults can cause fires


The Volt Pro Standard:


Immediate Troubleshooting

You get priority access to one of our licensed electricians for over-the-phone troubleshooting

Polite, Respectful & Professional

We arrive with a smile, remove our shoes and treat your home as if it were our own

You're The First Priority

We arrive on-time and keep you updated throughout the entire process

Constant Communication

We work exactly to your unique requirements. You’re our first priority—always

Dangerous Conditions Detectable
by Thermographic Inspection


  • Loose / deteriorated connections

  • Overloads

  • Open circuits

  • Unbalanced loads

  • Inductive heating

  • Harmonics

  • Defective equipment

Dangerous Conditions Detectable by Thermographic Inspection


  • Loose / deteriorated connections

  • Overloads

  • Open circuits

  • Unbalanced loads

  • Inductive heating

  • Harmonics

  • Defective equipment

Benefits of Thermographic Inspection


  • Reduce unscheduled down time

  • Increase equipment life

  • No service interruption during inspection

  • Lower risks

  • Lower repair costs

  • Increase profits

  • Prevent catastrophic failures

  • Lower insurance premiums due to reduced losses

Looking for information on Electrical Thermographic Inspections?


Prior to an electrical component breaking down, it heats up. Thermographic imagery is used to perform preventative maintenance inspections on electrical equipment because excess heat is usually the first sign of trouble on electrical (or mechanical) apparatus.

Loose connections, imbalanced circuits or loads, defective breakers, damaged switchgear, faulty fuses or circuit breakers, overloaded circuits, poor workmanship, material defects and a range of other conditions will eventually lead to excess heat and component failure.

Thermography can find problems early in the failure cycle. Early detection allows maintenance personnel to take corrective action before a component fails, minimising damage to the component and reducing repair costs.

Request Your Free Consultation Now

Providing Electrical Expertise to
Australia’s Biggest Brands


Providing Electrical Expertise to Australia’s Biggest Brands


Melbourne’s Leading Local Electrician


We work with you to design and install residential electrical systems, specialising in LED design
and installation, switchboard upgrades, A/C installation, general electrical maintenance and
home automation system and much more

Melbourne’s Leading Local Electrician


We work with you to design and install residential electrical systems, specialising in LED design and installation, switchboard upgrades, A/C installation, general electrical maintenance and
home automation system and much more